SG320-M Mini Solar Water Pump Inverter For 3 Phase 380V AC Pumps 

Fully automatic system using variable speed drive compatible with AC, 3-phase, submersible and surface mount pumps, and high efficiency PMSM Pumps. The system is composed of a PV generator, a pump and a solar pump drive. Based on the design philosophy that it is more efficient to store water rather than electricity, there is no energy storing device such as storage battery in the system. The system is prepared to be combined with a elevated water storage, e.g. water tower or an uphill tank installation.

  Zundrve Mini Solar Pump Inverter Models list: 

Model	Input voltage	Output for pumps	Power	Pictures
SG320-0K7GB-4T-M SG320-1K5GB-4T-M SG320-2K2GB-4T-M	250 to 900VDC or 380 to 460VAC	3 PH 0 to 380V/460V/480V	0.75kw, 2.5A 1.5kw, 3.7A 2.2kw, 5.A

Zundrive solar pump inverter system Presentation
Zundrve Solar Water Pumping Solution is a fully automatic system designed to provide water at affordable cost for people with limited or no access to electricity. It uses the most advanced S300/3200 variable speed drive to regulate the speed of a 3-phase AC motor depending upon the solar energy available from the solar panel.

Irrigation of land, domestic water supply, fish farming, livestock, swimming pool, fountain, drip irrigation & sprinkler, industrial application, swimming pool…
Features of solar pumping system

Low carbon economy With utilization of solar pump Drino inverters helps you in reducing your carbon footprint. Reduce CO2 releasing. Renewable solution	In-built MPPT Maximum power point tracking ensures that you get the most power output possible from your solar panel and maximize your pump delivery throughout the day.	Pump specific protection Inbuilt flow measurement and flow detection function. Inverter turns off in case of dry run. Built in pumps short circuit protection, maximum pumps current setting,	Remote monitoring With the addition of optional modules you can monitor solar pump parameters from Anywhere when GPRS signal is available

Drino solar pump drive main Features

Solar Pump Inverter Hardware designS

DRINO SUN GREAT Models specification: 

Technical specification: 

**Solar pump drive specification when FA-00 set to 1&2 (CVT or MPPT) for solar pumping controlling function.
Recommended MPPT voltage range	Vmpp 131 to 350 VDC for 1S (80V to 350VDC input, 3PH 110 to 220VAC output) Vmpp 280 to 375VDC for 2S ( 150V to 450VDC input, 3PH 220 to 240VAC output) Vmpp 486 to 750 VDC for 4T ( 350V to 800VDC input, 3PH 380 to 460VAC output)
Recommended input Voc and Vmpp voltage	Voc 180(VDC), Vmpp 155(VDC) for 1S model or 110V AC pumps Voc 355(VDC), Vmpp 310(VDC) for 2S model or 220V AC pumps Voc 621(VDC), Vmpp 540(VDC) for 4T model or 380V AC pumps
Motor type	Control for permanent magnet synchronous motor and asynchronous motor pumps.
Rated output voltage	3-Phase,110V/160V/220V. 3-phase, 220V/380V/460V
Output frequency range	0~maximum frequency 600Hz.
MPPT efficiency	97%,
Ambient temperature range	G-type for submersible pumps, 150% rated current for 60s, 180% rated current for 2s   P type for general pumps, 120% rated current for 60s, 150% rated current for 2s
Solar pump control special performance	MPPT ( maximum power point tracking), CVT (constant voltage tracking), auto/manual operation, dry run protection, low stop frequency protection, minimum power input, motor maximum current protection, flow calculating, energy generated calculating and water tank level detected
Protection function	Phase loss protection, phase short circuit protection, ground to phase circuit protection , input and output short circuit protection. Stall protection
Protection degree	IP20, Air force cooling
Running mode	MPPT or CVT
Altitude	Below 1000m; above 1000m, derated 1% for every additional 100m.
Standard AC input  backup circuit	CE, Design based on vector control drive S300 and S3200 series, more specification please refer to S300 or S320 vector control drive operation manual
Technical specification when it used for speed and torque controlling of motor as FA00 set to 0.
voltage, frequency	Single phase 220V, 3 phase, 220V,380V, 660V and 1140V. Power 0.75kw to 37kw.
Control mode	0: VF control ; 1: Vectorized VF control ; 2：Open loop vector control 1 ; 3: High performance open loop vector control 2
Maximum frequency	0-650Hz
Multi-functions	PID Control, Carrier Frequency Adjustable, Current Limiter, Speed Search, Momentary Power Loss Restart,16 Step Speed (Max), 3-Wire connection, Slip Compensation, Frequency Jump,  DC braking, Upper/Lower Frequency, Torque control, Compatible for PMSM and IM, built in RS485, counting, fault information checking, fully fault protection function, frequency combination reference.

User also can use SG series solar pump inverter for general purpose inverter using when Fa00=0.
But Fa, Fb, Fc parameters can’t be activated.  
Models specification

SN	Models	Rate current	Output voltage ( 3PH VAC)	Applicable for pumps	External of drive size(mm)	MPPT voltage (VDC)	Weight (kgs)
Mini type 2S series : 150 to 450 VDC or 200 to 240VAC input, (MPPT 280 to 375VDC)
1	SG100-0K75GB-2S-N	4A	220V/240V	0.75KW	170*110*70	260 to 375	1.0
2	SG320-0K75GB-2S-M	4A	220V/240V	0.75KW	143*86*114	260 to 375	1.5
3	SG320-1K5GB-2S-M	7A	220V/240V	1.5KW	143*86*114	260 to 375	1.5
Mini type 4T series : 250 to 900 VDC or 380 to 460 VAC (MPPT 486 to 750VDC)
4	SG320-0K7GB-4T-M	2.5A	380V-460V	0.75KW	143*86*114	486 to 750	1.5
5	SG320-1K5GB-4T-M	3.7A	380V-460V	1.5KW	143*86*114	486 to 750	1.5
6	SG320-2K2GB-4T-M	5A	380V-460V	2.2KW	143*86*114	486 to 750	1.5
General type 2S series : 150 to 450 V DC or 200 to 240 VAC input, (MPPT 280 to 375VDC)
7	SG320-0K7GB-2S	4A	220V/240V	0.75KW	185*125*159	260 to 375	2.0
8	SG320-1K5GB-2S	7A	220V/240V	1.5KW	185*125*159	260 to 375	2.0
9	SG320-2K2GB-2S	10A	220V/240V	2.2KW	185*125*159	260 to 375	2.5
10	SG320-4K0GB-2S	16A	220V/240V	4.0KW	245*150*177	260 to 375	3.5
General type 4T series : 250 to 900 VDC or 380 to 460VAC input, (MPPT 486 to 750VDC)
11	SG320-0K7GB-4T	2.5A	380V-460V	0.75KW	185*125*159	486 to 750	2
12	SG320-1K5GB-4T	3.7A	380V-460V	1.5KW	185*125*159	486 to 750	2
13	SG320-2K2GB-4T	5A	380V-460V	2.2KW	185*125*159	486 to 750	2
14	SG320-4K0GB-4T	10A	380V-460V	4.0KW	185*125*159	486 to 750	2.5
15	SG320-5K5GB-4T	13A	380V-460V	5.5KW	245*150*177	486 to 750	3.5
16	SG320-7K5GB-4T	17A	380V-460V	7.5KW	245*150*177	486 to 750	4
17	SG320-011GB-4T	22A	380V-460V	11KW	247*160*178	486 to 750	5
18	SG320-015GB-4T	30A	380V-460V	15KW	247*160*178	486 to 750	5
19	SG320-018GB-4T	37A	380V-460V	18KW	335*217*190	486 to 750	10
20	SG320-022GB-4T	45A	380V-460V	22KW	335*217*190	486 to 750	18
21	SG320-030GB-4T	60A	380V-460V	30KW	432*285*225	486 to 750	18
22	SG320-037GB-4T	75A	380V-460V	37KW	432*285*225	486 to 750	29
23	SG320-045GB-4T	90A	380V-460V	45KW	600*385*270	486 to 750	29
24	SG320-055GB-4T	110A	380V-460V	55KW	600*385*270	486 to 750	29
25	SG320-075GB-4T	150A	380V-460V	75KW	700*473*307	486 to 750	43
26	SG320-090GB-4T	180A	380V-460V	90KW	700*473*307	486 to 750	47
27	SG320-110GB-4T	220A	380V-460V	110KW	930*579*375	486 to 750	90
28	SG320-132GB-4T	260A	380V-460V	132KW	930*579*375	486 to 750	100
29	SG320-160GB-4T	320A	380V-460V	160kw	930*579*375	86 to 750	130

System connection and commissioning. 
An enhanced version of AC Drive ( variable speed drive of motor speed and torque control), compatible with DC power and AC grid input.
Note*: Only allow one power source input at a time. 
1. Connect DC power Positive ( P ) and Negative ( N ) terminals to input R, T terminals of drive.
2. Connect output U, V, W terminals of drive to 3 phase AC pumps. ( Not drive for DC pumps and Single AC pumps).
3.Connect water level sensor to drive if need water tank level detecting.
4.Connect remote controller GPRS module ( option) if need remote monitor controlling function.
5. IP54 solar pump drive cabinet customization make is available including( AC/DC switchover, AC and DC breaker..) 
Easy installation and commissioning. 
1.Total Voc (open loop circuit )voltage input from solar arrays should be large than 1.15 times of Vmpp of drives.
For example: For 4T series, recommend 540V*1.15=621V; For 2S series, recommend 311*1.15=357V. (Voc)
2.The selecting power of solar arrays need large than 1.3 times power of total pumps.
For example, 0.9kw above for 0.75kw pumps, 2.86kw above for 2.2kw pumps.
Commissioning steps.( Please wait 30s after switching on for initialization

GPRS remote control (optional)
Functions of GPRS module establishing
1. Working Status Monitoring;
2. Inverter Control and parameters review and modify
3. Positioning can see where the solar pump system working
4. History Data Record, possible record 3 months working data of system

Appendix I.
A 160kw, solar pump inverter is working good in Lebanon.
It can started working at 9:30 with above 40Hz, and stopped working at 17:00 with above 40Hz.
Because customer need pump don’t work when output frequency is less than 40Hz. 

Prev:IP55 Solar pump inverter Next:SG320 Solar Pumps Inverter For 3 Phase 380V/440V AC Pumps